#18203: "Swiss tournament pairing improvement: ranking based pairing"
¿Qué ha pasado? Por favor, selecciona una de las opciones siguientes
¿Qué ha pasado? Por favor, selecciona una de las opciones siguientes
Por favor, comprueba si ya hay un informe sobre el mismo tema
Si es así, por favor VOTA por este informe. ¡A los informes con más votos se les da PRIORIDAD!
# | Status | Votes | Game | Type | Title | Last update |
---|
Descripción detallada
• Por favor, copia/pega el mensaje de error que ves en tu pantalla, si hay alguno.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Por favor, explica lo que querías hacer, lo que hiciste y lo que pasó
• ¿Qué navegador estás usando?
Google Chrome v81
• Por favor, copia/pega el texto mostrado en inglés en lugar de en tu idioma. Si tienes una captura de este error (buena práctica), puedes usar Imgur.com para subirla y copiar/pegar el enlace aquí.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• ¿Está este texto disponible en el sistema de traducción? Si es así, ¿ha sido traducido hace más de 24 horas?
• ¿Qué navegador estás usando?
Google Chrome v81
• Por favor explica tu sugerencia de manera precisa y concisa para que sea lo más fácil posible entender lo que quieres decir.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• ¿Qué navegador estás usando?
Google Chrome v81
• ¿Qué había en la pantalla cuando se quedó bloqueado? (¿mensaje de error?, ¿pantalla en blanco?, ¿una parte de la interfaz del juego?)
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• ¿Qué navegador estás usando?
Google Chrome v81
• ¿Qué parte de las reglas no se ha respetado en la adaptación de BGA?
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• ¿La infracción de las reglas es visible en la repetición de la partida? Si es así, ¿en qué jugada?
• ¿Qué navegador estás usando?
Google Chrome v81
• ¿Qué acción de juego querías realizar?
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• ¿Qué es lo que trataste de hacer para activar esta acción del juego?
• ¿Qué sucedió cuando lo hiciste (el mensaje de error, mensaje en la barra de estado del juego, ...)?
• ¿Qué navegador estás usando?
Google Chrome v81
• ¿En qué etapa de la partida ocurrió el problema (cuál era la instrucción actual del juego)?
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• ¿Qué sucedió cuando trataste de hacer una acción de juego (mensaje de error, mensaje en la barra de estado del juego, ...)?
• ¿Qué navegador estás usando?
Google Chrome v81
• Por favor, describe el problema de visualización. Si tienes una captura de este error (buena práctica), puedes usar Imgur.com para subirla y copiar/pegar el enlace aquí.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• ¿Qué navegador estás usando?
Google Chrome v81
• Por favor, copia/pega el texto mostrado en inglés en lugar de en tu idioma. Si tienes una captura de este error (buena práctica), puedes usar Imgur.com para subirla y copiar/pegar el enlace aquí.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• ¿Está este texto disponible en el sistema de traducción? Si es así, ¿ha sido traducido hace más de 24 horas?
• ¿Qué navegador estás usando?
Google Chrome v81
• Por favor explica tu sugerencia de manera precisa y concisa para que sea lo más fácil posible entender lo que quieres decir.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• ¿Qué navegador estás usando?
Google Chrome v81
Historial de informes
Agregar a este informe
- Otro ID de partida / ID de jugada
- ¿Se resolvió el problema al pulsar F5?
- ¿Apareció el problema varias veces? ¿Cada vez? ¿Aleatoriamente?
- Si tienes una captura de este error (buena práctica), puedes usar Imgur.com para subirla y copiar/pegar el enlace aquí.